Follow on Facebook @helpyourtrees
chemjettreeinjector.com

Emerald Ash Borer Treatment

Homeowner do it yourself (DIY) treatment for emerald ash borer can be done with Chemjet Tree Injectors.   Protect ash trees from emerald ash borer with tree injection using Chemjet Tree Injectors and take precautions to avoid spread of emerald ash borer (EAB) to healthy trees. (NOTE most of the information below can also be applied for bronze birch borer treatment.  This similar bug kills birch trees).

Pesticides can be used for emerald ash borer treatment to save ash trees. Proactive management is necessary to combat the emerald ash borer to avoid infestation and death of healthy ash trees.  EAB can be managed with a variety of strategies that prevent new infections and can actually save trees that are lightly infested.

Emerald Ash Borer is a non-native, wood-boring beetle that can attack all native ash tree species. This insect was first found in North America, in 2002, in southeastern Michigan and adjacent Ontario. It likely arrived in the early 1990s on solid-wood packing material from Asia. It has spread very quickly, largely due to human movement of firewood. To date, nineteen states and two Canadian provinces have confirmed EAB infestations, although there are still many uninfested ash trees, of all sizes in all affected states.

DISTRIBUTION OF EMERALD ASH BORER INFESTATION

2014 Distribution map of EAB Risk from the USDA:

USDA

 HOW EAB KILLS TREES

EAB adults are 1/2-inch long and metallic green. They emerge through small D-shaped holes starting in late May and may be flying until early September. Moving ash wood products during this time of year presents the greatest risk for spreading the insect to previously uninfested trees and/or sites. The larvae may be found year round. They bore through tree bark, and feed in the cambium, creating long serpentine galleries which get wider as the insects grow. This feeding pattern interrupts the tree’s vascular system, eventually girdling and killing the tree.  EAB can kill ash trees greater than 1 inch in diameter. In established infestation areas, most die within two to three years of becoming infested. Up to 1% of ash may survive on sites with heavy mortality. Some of these “lingering ash” show evidence of bark healing, suggesting possible host resistance.

EAB CONTROL

Work is being done to identify and use native parasites and predators that have been found feeding on EAB, parasitoid wasps from Asia have been released in 12 of the 19 infested states as part of an operational biological control program. In study sites, parasitism has slowed the rate of EAB population growth.

Do Not Transport Infested Wood

Cutting up trees infected by EAB for lumber, firewood or tree trimming and transporting the infected wood to new areas will transport the EAB to infest and kill trees in these areas.  Do not transport any wood or brush from EAB killed trees.  Adult borers will still emerge in the spring and summer from ash fire wood which was cut the previous winter.


CHEMICAL TREATMENT

EAB is very aggressive, so few ash trees will survive an infestation.  But there are things you can do to protect your trees. Chemical insecticide treatments can be conducted to protect and save valued trees.  These applications include drenching the soil around the tree with insecticide, spraying the tree trunk, and trunk injection treatments. If done properly and at the optimum time of year, the insecticide will keep EAB away from healthy trees for a period of time. If a tree is lightly infested, the insecticide treatment kills or drives away the EAB and the tree can start to heal borer wounds and ultimately thrive again.  Repeated treatments are needed every year or two to keep the EAB away from the tree.

Soil Drenching

This method involves mixing the appropriate concentration and volume of insecticide, commonly imidacloprid, diluted with water, and pouring onto soil or injecting into the soil around the base of the tree.  The tree roots take up some of the insecticide as it moves downward through the soil, then the treatment is circulated throughout the tree, leaves to roots.    Soil application of insecticides can take 6 to 8 weeks to reach the effective levels in the ash tree bark, so soil drenching with insecticide should be conducted in early to mid spring, or mid fall.

This method is relatively simple and easy to perform by landowners and the comparatively inexpensive insecticide imidacloprid is the weapon of choice.  There are good instructions on the bottle labels for how to mix and apply as a soil drench around the trees.

There are environmental and and potential human health risks associated with soil drenching for EAB control.  Dumping many gallons of insecticide on the ground year after year could cause slugs of insecticide to move past the tree roots downward through the soil, potentially causing groundwater contamination.   Also the soil around the tree will be a source of potential toxic exposure of pesticide to unintended receptors such as honey bees and other beneficial insects, and humans or animals that use the area.

Trunk Spray

With this method of EAB tree treatment, the lower portion of the ash tree trunk is sprayed with insecticide which penetrates through the bark and into the vascular system of a tree.   The insecticide dinotefuran is used for this method, and is sold under the brands Safari 20 SG, Transtect and Zylam.  Trunk spray treatments are done annually with dinotefuran.

Trunks spray is implemented by spraying all around the tree wetting the bark from the base up to about five feet high, taking care to avoid windy or rain conditions during application.   The insecticide is quickly absorbed into the vascular system, and is circulated throughout the entire tree within two or three weeks. Trunk spray should be conducted during mid to late spring after trees have leafed out.

Using the pesticide trunk spray allows use of less insecticide than soil drenching, and limits ground discharge if conducted properly.  But it does leave a potential insecticide exposure risk to any unintended receptors (humans, animals, birds, beneficial insects such as honey bees) which may come into contact with the treated bark.

 Trunk Injection

Direct injection of pesticides through the bark and into the trunk of ash trees is an environmentally sound and economical way of treating EAB.  With direct injection into the circulatory system of a tree, a much lower volume of chemical is needed because it all goes into the tree, leaving none on the ground or on the exterior tree bark for exposure to unintended receptors.  Trunk injection is the most efficient and works the fastest of EAB control methods, with the pesticide circulation throughout the tree within a few days. Trunk microinjections should be conducted during mid to late spring after trees have leafed out and throughout the summer.

Healthy or lightly infested ash trees can be treated using an insecticide to prevent infestation by EAB.  This can be easily conducted using Chemjet® Tree Injectors to inject pesticides such as injectable emamectin benzoate (like Tree-age G4 or TreeMec Inject),  or injectable*  imidacloprid (like Ima-Jet 5%) or Azadirachtin from Neem oil (like Aza-Sol) into small drilled holes at several locations around the circumference of the tree. The chemical is then carried throughout the tree, from up to the leaves down to all of the roots, effectively killing or driving away EAB currently in the tree, and preventing future infestation by visiting beetles.

*NOTE – For tree injection with imidacloprid you must use an injectable formulation, such as Ima-jet 5%.  If you use a milky colored imidacloprod product such as 2F or 2L, or any dry powdered imidacloprid that you mix with water, IT WILL NOT WORK with tree injection.  It contains an insoluble powder that quickly plugs up the injection hole.

A single injection treatment can protect ash trees for one or two years, depending on the type of insecticide used.  Also, lightly infested trees showing initial EAB symptoms can be treated and recover.

With implementation of microinjection using the inexpensive Chemjet® Tree Injector, it is economical for protection of many more ash trees. This brings to reality an economical option of DIY tree injection for all of the healthy or lightly affected ash on your woodlot to save your trees and control continued expansion of the infestation.

chemjettreeinjector.com

Injection Procedure for Emerald Ash Borer

This example injection procedure for EAB is adapted from the Chemjet® manufacturer suggested procedure, and from the Tree-age G4 label (follow labeled mixing and use instructions for the chemical that you choose to use).  You can inject at the root flare just above the ground, or at some point up the trunk that is easier to reach.  You don’t need to treat around the whole trunk at once. You can work your way around the tree over the course of a couple days with fewer Chemjets if you wish.

  1. Confirm with a qualified arborist or biologist that this procedure is appropriate for your tree.   You may not have an EAB risk or there may be other circumstances that would cause this procedure to be inappropriate. Also there may be a risk that this procedure may harm your tree.
  2. Only inject ash trees during the seasonal time period necessary to be effective for treatment of EAB.
  3. In southern states inject trees after a good rain or after substantial watering. Do not inject trees during sustained drought conditions.
  4. Plan for use of one Chemjet® Tree Injector every six inches around the circumference of the ash tree.
  5. Follow personal protection recommendations from the treatment chemical label.  This would generally include wearing rubber gloves and safety goggles during all mixing, injection and cleanup work.
  6. Disinfect Chemjet® injector and drill bit by washing and scrubbing in diluted bleach solution or Lysol disinfectant solution. Pull disinfectant solution through the nozzle filling the injector several times.  Rinse with clean water.
  7. Prepare the insecticide injections per the instructions on the label from the chemical you are using.  From the Tree-age G4 label the maximum dose is just over 6-inch spacing around the circumference of the tree using Chemjet Tree Injectors filled with 20 ml of Tree-Age G4 Inject.  Lesser doses and reduced spacing could be accomplished by diluting the chemical with water.
  8. Drill the first three holes around tree at 45 degree angle downward no more than 1.25 inch deep. Only use a 11/64 drill bit.   Drilling more than three holes may heat up the bit and scorch the wood which will inhibit injection.
  9. Pull the chemical mix from step 7 into the injector until full at 20 ml and lock the handle back while twisting.
  10. Insert into recently drilled hole. Push into place and seal (don’t twist because the nozzle may break off).
  11. Using both hands, hold the Chemjet® in place and then twist and release the red plunger so that injection begins. If there is leakage push the nozzle in harder to seal.   Repeat for remaining two holes.
  12. After all chemical is in tree, pull injector straight out of hole. If chemical starts oozing back out of open hole, replace Chemjet® and leave there for another half hour or use a plug.
  13. Repeat with three more holes, going around tree.
  14. If an injector is taking chemical slowly, leave it in place and move on. It could take up to 24 hours.
  15. IMPORTANT: Disinfect drill bit and all Chemjets (inside and out) before using on any other tree per step 6.  Disinfect your hands and put on new rubber gloves to avoid potential for transferring diseases to next tree.
  16. Take Care of your Chemjet® Tree Injectors after the work is done (or during long term work at least once per week) so they keep working smoothly by disassembling, washing all parts with hot soapy water, rinse and air dry, then lubricate the nozzle barrel and rubber plunger washer with silicone lube or vegetable oil before reassembly.

Treatment Chemicals

In addition to the Tree-age G4 there are several other insecticides available for use in treatment and control of emerald ash borer including TreeMec Inject, Ima-JetAza-Sol, Ace-Jet and others described in this article: EAB Treatment Pesticide Alternatives. 

Additional information

Buy Chemjet Tree Injectors Now

Products

How Chemjet Works

Oak Wilt Disease and Treatment

Dutch Elm Disease Treatment

Save Your Trees from Oak Wilt

Save your trees from Pine Bark Beetle

Case Study: Microinjection to Protect Trees from Oak Wilt

Emerald Ash Borer Treatment

Hemlock Woolly Adelgid Treatment

Sudden Oak Death Treatment

Asian Longhorned Beetle Treatment

Orchard Crops

Plugs for Tree Injection Holes

Chemjet Tips and Ideas

Video: Injecting for Oak Wilt

Video:  Chemjet use in Australia

Find an Arborist

Logical Result LLC is a North American Distributor for Chemjet Tree Injectors. We have also posted a few links to some products that will refer you to other suppliers. If you click the links provided for the linked suppliers to purchase items, we may receive a referral commission as an affiliate of the sellers at no cost to you.